The chair was uncomfortable for me at first but I have had it a month now and the seat is more comfortable now. My only complaint is I wish the seat would lower about an inch. It would make it more comfortable for my feet to be placed on the floor better. I have to schooch to the front of the seat to have my feet touch the floor. Just as seen in the picture!!!
Pro:
This chair has a premium fabric bounding the body.
Very thick and comfortable stuffing.
The side arm/rests are functional as they can easily be lifted up when not in use.
Very active wheels.
PLUS incredibly helpful customer service. I had issues with assembling and emailed the seller, within a very short amount of time I was provided with great solutions. They are very kind!
Con:
Be aware that this chair is quite wide while not deep enough to sit on.
You might need extra hands to install.
Overall, a decent purchase! Very durable.
This is the best office chair Ive used, even after sitting in it for 10 hours 5 days a week my back doesnt hurt. Not sure it will stand up to years of heavy use but seems sturdy enough to last a couple of years. Very good value.
Okay, so in the early stages of the pandemic, your girl Mira like a lot of people used a kitchen chair or an old wooden desk chair to WFH before realizing that her back was not on board with this plan. I got memory foam seat cushions, which helped a lot, but I did ultimately decide I needed a desk chair. I wanted something attractive, and I liked that this was velvet and available in many colors. I got the beige, which matches some accent colors (not shown) in the office off our bedroom.
I was able to assemble my chair myself over my WFH lunchbreak yesterday. The only part that is difficult to do by oneself is getting the back screwed in, because it attaches via four bolts to the mechanism for the armrest, after the armrest is in place. This is going to be tough either way (it wouldnt be any better if you put the armrests on the back before the seat). Ideally have a second person hold it to align the holes to make this part easier, but I was able to do it myself. The construction generally is nice. I did want to note that some people reported the minimum height as 18, from floor to top of seat cushion. It is more like 19.5 for my chair / FWIW, this makes it just about a half inch too tall to comfortably tuck away under my particular vintage desk. What Im going to probably do is put feet under the desk legs to jack it up an inch, because its a pretty low desk already, because I did buy this specific chair also for arms that fold up to allow it to tuck under a desk (the problem with the desk is also that, being vintage, the width of the leg opening is quite small, much narrower than any modern desk chair). Anyway, for me, the min height as noted is a bit higher. Im about 510 / 34 inseam, and I actually usually jack adjustable chairs up, but the min height is actually fairly comfortable for me (my husband sat in it, hes much shorter, and he did think it was comfortable, but if you have very short legs and dont like them swinging off the ground, beware).
Otherwise, the cushions seem nice. There are reviews with substantial cushion complaints and apparently the mfr said that there was a quality issue at their plant / this is a brand new chair, but so far the bolsters all seem well made. It is just a bit lacking in lumbar support for me, and so I did order a small cushion (I recommend trying one of the tubular ones / I tried a typical 10x20 cushion that is usually on one of our beds as a throw pillow and that is much too much). I think itll be fine since Ill be able to add a contrast color that way. Overall it looks nice, and once I deal with the issue of being able to tuck it under the desk, itll last in this setup at least as long as the pandemic, and then Ill IDK take it to one of my offices or something.
All you other old people WFHing, who are sitting on uncomfortable chairs, this stuff is going to last for a while, you ought to upgrade to better chairs. Srsly. Assembled Quickly.
I received an email from Myka in response to my disappointment. She offered to send me a replacement for the hydraulic lift. She kept her word, and I received it at no cost. It has been installed, and so far so good. The chair is actually taller than it was, which I think is what another reviewer experienced. Thats OK because it was too low before. I appreciate the good customer service and Im amending my rating to reflect my satisfaction with receiving the replacement part. Thank you, Myka.
The material and comfort of the cushions are good; however, this chair is not made for a bigger girl like me. The hydraulic lift quit working within a few months. Im short and like to have my chair lift me up so Im even with the top of the desk so using the computer is comfortable. My chair will lift to the highest position, but begins to sink immediately. Ive had to put a pillow in the chair to raise me to the height of the desk. Ive had the chair less than a year and am already looking for my next chair. This works.
Bigger than I expected, but comfortable. I like a slight backward tilt in the seat and when I realized I could lock the tilt instead of just rocking, it felt much better. It took me a while to get it how I like it but now it is really nice. Awesome!
I love the look of this chair for my home office. However, I have had the chair for about two weeks now and am still trying to become completely accustomed to it. It is the perfect height for me (Im 59). I feel like I slide forward in the chair and that back support was different than expected. Hoping that feeling goes away the more I use the chair. I do love the look it is a definite improvement over the stiff task chair I was previously using. This is a good addition to my work from home space. Fair for the price.
Reviews
Good Chair
Comfy, easy to put together loves it!
Great but
Decent price, fast shipping, very easy to assemble, and comfortable Good,
Sturdy, clean lines, looks nice
The chair was uncomfortable for me at first but I have had it a month now and the seat is more comfortable now. My only complaint is I wish the seat would lower about an inch. It would make it more comfortable for my feet to be placed on the floor better. I have to schooch to the front of the seat to have my feet touch the floor. Just as seen in the picture!!!
Affordable chair with a decent quality.
Pro: This chair has a premium fabric bounding the body. Very thick and comfortable stuffing. The side arm/rests are functional as they can easily be lifted up when not in use. Very active wheels. PLUS incredibly helpful customer service. I had issues with assembling and emailed the seller, within a very short amount of time I was provided with great solutions. They are very kind! Con: Be aware that this chair is quite wide while not deep enough to sit on. You might need extra hands to install. Overall, a decent purchase! Very durable.
Good for a home office
This is the best office chair Ive used, even after sitting in it for 10 hours 5 days a week my back doesnt hurt. Not sure it will stand up to years of heavy use but seems sturdy enough to last a couple of years. Very good value.
Old woman needing a WFH update you guys
Okay, so in the early stages of the pandemic, your girl Mira like a lot of people used a kitchen chair or an old wooden desk chair to WFH before realizing that her back was not on board with this plan. I got memory foam seat cushions, which helped a lot, but I did ultimately decide I needed a desk chair. I wanted something attractive, and I liked that this was velvet and available in many colors. I got the beige, which matches some accent colors (not shown) in the office off our bedroom. I was able to assemble my chair myself over my WFH lunchbreak yesterday. The only part that is difficult to do by oneself is getting the back screwed in, because it attaches via four bolts to the mechanism for the armrest, after the armrest is in place. This is going to be tough either way (it wouldnt be any better if you put the armrests on the back before the seat). Ideally have a second person hold it to align the holes to make this part easier, but I was able to do it myself. The construction generally is nice. I did want to note that some people reported the minimum height as 18, from floor to top of seat cushion. It is more like 19.5 for my chair / FWIW, this makes it just about a half inch too tall to comfortably tuck away under my particular vintage desk. What Im going to probably do is put feet under the desk legs to jack it up an inch, because its a pretty low desk already, because I did buy this specific chair also for arms that fold up to allow it to tuck under a desk (the problem with the desk is also that, being vintage, the width of the leg opening is quite small, much narrower than any modern desk chair). Anyway, for me, the min height as noted is a bit higher. Im about 510 / 34 inseam, and I actually usually jack adjustable chairs up, but the min height is actually fairly comfortable for me (my husband sat in it, hes much shorter, and he did think it was comfortable, but if you have very short legs and dont like them swinging off the ground, beware). Otherwise, the cushions seem nice. There are reviews with substantial cushion complaints and apparently the mfr said that there was a quality issue at their plant / this is a brand new chair, but so far the bolsters all seem well made. It is just a bit lacking in lumbar support for me, and so I did order a small cushion (I recommend trying one of the tubular ones / I tried a typical 10x20 cushion that is usually on one of our beds as a throw pillow and that is much too much). I think itll be fine since Ill be able to add a contrast color that way. Overall it looks nice, and once I deal with the issue of being able to tuck it under the desk, itll last in this setup at least as long as the pandemic, and then Ill IDK take it to one of my offices or something. All you other old people WFHing, who are sitting on uncomfortable chairs, this stuff is going to last for a while, you ought to upgrade to better chairs. Srsly. Assembled Quickly.
Disappointed / UPDATED
I received an email from Myka in response to my disappointment. She offered to send me a replacement for the hydraulic lift. She kept her word, and I received it at no cost. It has been installed, and so far so good. The chair is actually taller than it was, which I think is what another reviewer experienced. Thats OK because it was too low before. I appreciate the good customer service and Im amending my rating to reflect my satisfaction with receiving the replacement part. Thank you, Myka. The material and comfort of the cushions are good; however, this chair is not made for a bigger girl like me. The hydraulic lift quit working within a few months. Im short and like to have my chair lift me up so Im even with the top of the desk so using the computer is comfortable. My chair will lift to the highest position, but begins to sink immediately. Ive had to put a pillow in the chair to raise me to the height of the desk. Ive had the chair less than a year and am already looking for my next chair. This works.
comfy.
cushion is luvly. wish back leaned separate from bottom, otherwise it would be a 5 star. Do the work.
Adjustable tilt.
Bigger than I expected, but comfortable. I like a slight backward tilt in the seat and when I realized I could lock the tilt instead of just rocking, it felt much better. It took me a while to get it how I like it but now it is really nice. Awesome!
Love this chair for work from home
I love the look of this chair for my home office. However, I have had the chair for about two weeks now and am still trying to become completely accustomed to it. It is the perfect height for me (Im 59). I feel like I slide forward in the chair and that back support was different than expected. Hoping that feeling goes away the more I use the chair. I do love the look it is a definite improvement over the stiff task chair I was previously using. This is a good addition to my work from home space. Fair for the price.
Add a review