Assembly was a pain because of so many pieces, but eventually it becomes a little easier and you get into the flow of things. There were a few scratches, Im assuming it occurred in transit. My son loves his new bed
These are HEAVY!!! Im a novice assembler and I figured it out. One drawer piece came broken, but didnt really need to be replaced. So far they are aming!!!
Boy oh boywhat a bear to assemble! Be ready. Send all your loved ones away and put on some calming music. The bed is sturdy and nice looking. Dont skip screwing in the this makes the bed much more sturdy and ready for use.
I give the instruction manual is a 9/10. If I wrote it it would have been 10/10. Waaaaay better than most manual.
There are extra assemble parts included. The parts are separately carded for the trundle and for the bed. The flat washers are not actually flat. They are curved so be sure when you install them that the curve matches the curve of the frame.
Some hints:
When doing the bed, leave all the bolts finger tight until you have installed the slat spacers THEN tighten the bolts.
Do a rough guess for the centering of the slat rings and . Go back and measure and figure the center and just tap them to whatever center you want. Mine was 20/3/8from the outside. Takes less than 5 minutes.
After you have assembled the trundle perimeter finger tight, stand it up on the narrow end to install the and spacers to the midway point. Flip it over and do the other end. This way you are standing. As with the bed, install all the slat spacers and center them THEN lay it down on the floor THEN tighten the bolts.
When inserting the plastic locks for the , insert one end then push on the other end. They go in much easier. If you insert one end then press in the middle, it is more difficult and you will also break some of the locking tabs.
You could probably get away with a 9mattress on the trundle.
On the bed, it is about 8to the top of the curved hoops. If you go taller, it may look out of proportion.
I used a quart freezer bag and placed a grommet in the corner and placed all the extra parts and a card with the name and model and etc info and twist/tied it to the frame where it is hidden from view.
Perfect big girl bed for transitioning my 3 year old out of her crib. Its really sturdy and well made, especially for the price point! The trundle underneath is perfect and will accommodate normal size mattresses, so no worries about finding a thin mattress to fit. We are so pleased with this purchase and highly recommend.
Reviews
Satisfied customer
Assembly was a pain because of so many pieces, but eventually it becomes a little easier and you get into the flow of things. There were a few scratches, Im assuming it occurred in transit. My son loves his new bed
Great beds for a good price!
These are HEAVY!!! Im a novice assembler and I figured it out. One drawer piece came broken, but didnt really need to be replaced. So far they are aming!!!
Sturdy and pretty once you actually get it together.
Boy oh boywhat a bear to assemble! Be ready. Send all your loved ones away and put on some calming music. The bed is sturdy and nice looking. Dont skip screwing in the this makes the bed much more sturdy and ready for use.
Great bed, but beware of color.
Cute bed but color is swimming poolblue. Not the same color as picture on .
Great frame
I give the instruction manual is a 9/10. If I wrote it it would have been 10/10. Waaaaay better than most manual. There are extra assemble parts included. The parts are separately carded for the trundle and for the bed. The flat washers are not actually flat. They are curved so be sure when you install them that the curve matches the curve of the frame. Some hints: When doing the bed, leave all the bolts finger tight until you have installed the slat spacers THEN tighten the bolts. Do a rough guess for the centering of the slat rings and . Go back and measure and figure the center and just tap them to whatever center you want. Mine was 20/3/8from the outside. Takes less than 5 minutes. After you have assembled the trundle perimeter finger tight, stand it up on the narrow end to install the and spacers to the midway point. Flip it over and do the other end. This way you are standing. As with the bed, install all the slat spacers and center them THEN lay it down on the floor THEN tighten the bolts. When inserting the plastic locks for the , insert one end then push on the other end. They go in much easier. If you insert one end then press in the middle, it is more difficult and you will also break some of the locking tabs. You could probably get away with a 9mattress on the trundle. On the bed, it is about 8to the top of the curved hoops. If you go taller, it may look out of proportion. I used a quart freezer bag and placed a grommet in the corner and placed all the extra parts and a card with the name and model and etc info and twist/tied it to the frame where it is hidden from view.
Assembly is rough but result is good
Looks great when u finally get it together. Great for the money and as spare room bed.
Easy to put together
My daughter loves her bed . and so does her friends that dont have to sleep on her floor now lol
If you have a choice dont ship FedEx. 3 items damaged in one month.
Exactly as described
Color is a little more bluish than showed but ok
Nothing
Great Bed for Toddlers/Young Children
Perfect big girl bed for transitioning my 3 year old out of her crib. Its really sturdy and well made, especially for the price point! The trundle underneath is perfect and will accommodate normal size mattresses, so no worries about finding a thin mattress to fit. We are so pleased with this purchase and highly recommend.
Add a review