Overall I would say its a great buy. Its a great price and it looks really nice. It was relatively easy to put together and the material is sturdy. My only suggestion to the creators would be to consider using magnetized screws/nails just because it makes it easier to put together when using a drill. Other than that its a great bed frame!
Nice loo and well made for price. are more spacious than anticipated. Could use some poly to protect finish. Already a couple scratches while just being assembled.
First, the things I didnt like which they are no huge deal, but very frustrating. The parts (i.e screws and other fasteners) could of been separated better. All the screws and such were all put in one bag except for a few. This bed comes in three separate boxes. The fastener are all separated and just to put the bed frame together you have to open all three boxes. It would of been much easier if they just put all the fasteners in one box. The instructions tell you to put all the threaded little nuts in the boards when you are ready to put the bed frame together. I did not do this because the holes are drilled to big and they would just fall out when moving each part of the bed around, so i just put them in as I needed them.
The bed is of good construction and only took me three hours to put together. I did see a review that said it took one person nine hours. I put the bed together myself the same as the other individual. The bed seems to be solid and I recommend putting lock tight in the allen screws that hold the bed together, unless you plan on moving frequently. One reviewer mentioned having to tighten the screws every so often. The bed was not difficult to put together and the instructions are very clear.
For the price it served the purpose.
It was for an apartment bedroom with limited storage?
Took me about 7 hours to put it together by myself. Directions were fair, you need to be a bit intuitive
dont all fit into the slots great but they all work and close. Time will tell how well this holds up
Pretty typical made in China furniture
Just started assembly and so far its going together OK. No problem for those with basic assembly skills. Be careful, take your time. Dont cross thread or over torque anything. Recommend NOT to use a power screwdriver. This not a job for those with bad knees since most of the assembly is on the floor. One thing I think is kinda dumb is dropping in the JRN nuts into the inner gables and stabilizers on step 4 and 5. They fall right through! So whats the point of doing that now? Best wait until the those parts actually get installed to slide in those JRNs. Also the cams you insert into the drawer sides as per step 11 will fall right out. But they install and twist lock in place easily with the drawer front in step 11d.
The slats will not move around after assembly if you pinch the U channels between the slats with pliers. Or wrap the ends of the slats with 1 wide strips of duct tape.
Make sure you have at least 1 10 between the side of the bed and the wall. Otherwise you can not get the assembled installed.
Sliding the assembled bed in final position must be done with care, moving just a little at a time. Get some help if available. You want to keep the corners square. And yes small corner braces are recommended. You might consider casters as well.
Keep in mind, if you have nightstands, you may not be able to open the next to them.
Have decided on a 10 gel infused memory foam mattress such as the Olee one as sold here on .
Will probably reinforce as per earlier reviewer and update this review after final assembly.
update After installing the suggested felt tape and angle brackets, we are now sleeping our new bed for the first time. Decided to go with a 10 Serta Avesta gel memory foam mattress made right here in Michigan. Got a better deal on it from Sams Club. Wife is snoring away. Jury will be out for a while as I am accustomed to a water bed since 1978. Already find I am reaching for the heater control thats not there. So well see how it goes. I did order the bookcase headboard which should be here soon. I believe that is used in lieu of the nightstands which do block two .
Just as described. Took a minute to put together but then again it is a giant bed. Instructions are easy to follow. For anyone that says the do not line up, you need to shift the bed. We had that happen when we initially put it together but we shifted the bed and the line up just fine and close. So far pretty happy.
Reviews
Good Buy!
Overall I would say its a great buy. Its a great price and it looks really nice. It was relatively easy to put together and the material is sturdy. My only suggestion to the creators would be to consider using magnetized screws/nails just because it makes it easier to put together when using a drill. Other than that its a great bed frame!
Pleased
Nice loo and well made for price. are more spacious than anticipated. Could use some poly to protect finish. Already a couple scratches while just being assembled.
Sawn Logs
I sleep with the gods now. Thanks!!!
Just purchased and put together.
First, the things I didnt like which they are no huge deal, but very frustrating. The parts (i.e screws and other fasteners) could of been separated better. All the screws and such were all put in one bag except for a few. This bed comes in three separate boxes. The fastener are all separated and just to put the bed frame together you have to open all three boxes. It would of been much easier if they just put all the fasteners in one box. The instructions tell you to put all the threaded little nuts in the boards when you are ready to put the bed frame together. I did not do this because the holes are drilled to big and they would just fall out when moving each part of the bed around, so i just put them in as I needed them. The bed is of good construction and only took me three hours to put together. I did see a review that said it took one person nine hours. I put the bed together myself the same as the other individual. The bed seems to be solid and I recommend putting lock tight in the allen screws that hold the bed together, unless you plan on moving frequently. One reviewer mentioned having to tighten the screws every so often. The bed was not difficult to put together and the instructions are very clear.
you need to be a bit intuitive dont all fit into the slots great but they all work and close
For the price it served the purpose. It was for an apartment bedroom with limited storage? Took me about 7 hours to put it together by myself. Directions were fair, you need to be a bit intuitive dont all fit into the slots great but they all work and close. Time will tell how well this holds up Pretty typical made in China furniture
Under construction .
Just started assembly and so far its going together OK. No problem for those with basic assembly skills. Be careful, take your time. Dont cross thread or over torque anything. Recommend NOT to use a power screwdriver. This not a job for those with bad knees since most of the assembly is on the floor. One thing I think is kinda dumb is dropping in the JRN nuts into the inner gables and stabilizers on step 4 and 5. They fall right through! So whats the point of doing that now? Best wait until the those parts actually get installed to slide in those JRNs. Also the cams you insert into the drawer sides as per step 11 will fall right out. But they install and twist lock in place easily with the drawer front in step 11d. The slats will not move around after assembly if you pinch the U channels between the slats with pliers. Or wrap the ends of the slats with 1 wide strips of duct tape. Make sure you have at least 1 10 between the side of the bed and the wall. Otherwise you can not get the assembled installed. Sliding the assembled bed in final position must be done with care, moving just a little at a time. Get some help if available. You want to keep the corners square. And yes small corner braces are recommended. You might consider casters as well. Keep in mind, if you have nightstands, you may not be able to open the next to them. Have decided on a 10 gel infused memory foam mattress such as the Olee one as sold here on . Will probably reinforce as per earlier reviewer and update this review after final assembly. update After installing the suggested felt tape and angle brackets, we are now sleeping our new bed for the first time. Decided to go with a 10 Serta Avesta gel memory foam mattress made right here in Michigan. Got a better deal on it from Sams Club. Wife is snoring away. Jury will be out for a while as I am accustomed to a water bed since 1978. Already find I am reaching for the heater control thats not there. So well see how it goes. I did order the bookcase headboard which should be here soon. I believe that is used in lieu of the nightstands which do block two .
Instructions are easy to follow
Just as described. Took a minute to put together but then again it is a giant bed. Instructions are easy to follow. For anyone that says the do not line up, you need to shift the bed. We had that happen when we initially put it together but we shifted the bed and the line up just fine and close. So far pretty happy.
Works well
Not the highest quality material but works well for the price.
Sturdy and simple build instructions
Very sturdy. 16 yr old assembled himself in about 4 hours. with a few breaks.
Looks great went together very fine
Looks great went together very fine
Add a review