My only complaint is the support legs were off center so I couldnt push the drawers in properly. I had to re drill the holes for the legs to center them. A benefit would be guide rales for the drawers. Many screws missing for the support boards. Just Buy It.
The bed frame is nice. But it showed up and it was already chipping away and a wheel already fell off because the wood is not strong enough Horrible to put together.
Ive had to build 4 bedframes at least over the past year and half, but this one might have been one of the more difficult ones. Like a lot of the 1 and 2 star reviews talk about, there is a problem with missing labels, and dinged or damaged parts. Thankfully for me, the damage was aesthetic and miniscule, or in places nobody will be able to see. However, my roommate is having to take on a risk because the one of the bed posts has misaligned holes, so we had no other choice but to leave a dowel out of it in order for it fit in. With the parts being unlabeled, we of course ran into a case of having to undo the frame part way through to swap two different posts, which was more than a pain to say the least. Again with that too was a constant of second guessing ourselves and trying to divine just what might go where with the wordless instructions. The biggest offender of the instructions were three wooden blocks that act as the drawer stops; the picture showing partially where it would be going, but on a terrible angle with no follow up to see more. Feeling for pilot holes wouldve been a great hint as to where they would be going, but being that this frame needed to be as frustrating to put together as possible, there were no pilot holes for them. A decent amount of elbow grease at an incredibly awkward angle does the trick at least. As for no pilot holes as well as some confusion too, the drawer wheels make you feel like youre trying to solve some puzzle of where center might be. Instead of pilot holes, there are holes on the inside block they get screwed into that you match up with one of the screw holes on the wheel itself. For my preference on how to get it as in the middle as possible, I lined the screw hole on the wheel facing the drawer with the second hole, then had to use a pen and make two lines that I then made pilot holes for myself to line up with the wheels holes. I certainly messed up 3 of the 8 wheels, which again couldve been easily avoided had they just given me pilot holes to start instead of a riddle. I think the bed looks nice and cute despite how hard the manufacturer wanted it turn out bad. I can only leave any potential buyers of this with a warning of frustration and back pain to come. To small for the price.
Missing 1 screw, and no home depot could find it Delivery was late and left it behind the door of the building insted of by apartment door which is upstairs. Had to pay for shipping and if i would return it same thing. So not worthy ,cheap wood not good quality i compered to.
This bed was easy to assemble and good and heavy. Not cheap. Very sturdy wood and love that it came with extra pieces of weed to add stabilizers to the floor so that the slats are steady. Nice fit.
Showed up just days after ordering. Super easy to assemble only took 1/2 hr. the two side boards are super flimsy and fit in place losley, kind of a waste of Matireal. We ordered the full size, its not super sturdy but wont be used on a daily basis. We made more legs to attach to the slats as they only make 4 per bed, the full size needs 8/10 of them because of how big the bed is and how flimsy slats are. Over all its a nice bed for the price. I will say the lack of sturdiness is do to the thin beds slats. Company use solid pine slats with a single long wood rail with 6 support posts on it to attach under slats in middle of bed that runs head to foot, this will make bed sturdy and hold extra150lbs in weight when/ if needed. Its not as sturdy as I would have like.
I actually bought 2 of these for my children and they love them! I would advise hammering the wooden slots down with nails otherwise theyll shift around but its a sturdy beautiful frame! Cool!!
Daybed is attractive but very difficult to assemble. After several frustrating hours I emailed the customer service department asking about a particular diagram. The only thing they provide are some very confusing drawings with letters, numbers. Some are clearly wrong. The answer I received was we dont have an assembly department The bed is still not finished! Sturdy for light items.
Reviews
Parts
My only complaint is the support legs were off center so I couldnt push the drawers in properly. I had to re drill the holes for the legs to center them. A benefit would be guide rales for the drawers. Many screws missing for the support boards. Just Buy It.
Condition is not 100
The bed frame is nice. But it showed up and it was already chipping away and a wheel already fell off because the wood is not strong enough Horrible to put together.
Missing labels, unclear instructions, frustrating experience
Ive had to build 4 bedframes at least over the past year and half, but this one might have been one of the more difficult ones. Like a lot of the 1 and 2 star reviews talk about, there is a problem with missing labels, and dinged or damaged parts. Thankfully for me, the damage was aesthetic and miniscule, or in places nobody will be able to see. However, my roommate is having to take on a risk because the one of the bed posts has misaligned holes, so we had no other choice but to leave a dowel out of it in order for it fit in. With the parts being unlabeled, we of course ran into a case of having to undo the frame part way through to swap two different posts, which was more than a pain to say the least. Again with that too was a constant of second guessing ourselves and trying to divine just what might go where with the wordless instructions. The biggest offender of the instructions were three wooden blocks that act as the drawer stops; the picture showing partially where it would be going, but on a terrible angle with no follow up to see more. Feeling for pilot holes wouldve been a great hint as to where they would be going, but being that this frame needed to be as frustrating to put together as possible, there were no pilot holes for them. A decent amount of elbow grease at an incredibly awkward angle does the trick at least. As for no pilot holes as well as some confusion too, the drawer wheels make you feel like youre trying to solve some puzzle of where center might be. Instead of pilot holes, there are holes on the inside block they get screwed into that you match up with one of the screw holes on the wheel itself. For my preference on how to get it as in the middle as possible, I lined the screw hole on the wheel facing the drawer with the second hole, then had to use a pen and make two lines that I then made pilot holes for myself to line up with the wheels holes. I certainly messed up 3 of the 8 wheels, which again couldve been easily avoided had they just given me pilot holes to start instead of a riddle. I think the bed looks nice and cute despite how hard the manufacturer wanted it turn out bad. I can only leave any potential buyers of this with a warning of frustration and back pain to come. To small for the price.
Not worthy money
Missing 1 screw, and no home depot could find it Delivery was late and left it behind the door of the building insted of by apartment door which is upstairs. Had to pay for shipping and if i would return it same thing. So not worthy ,cheap wood not good quality i compered to.
Daydreaming
This bed was easy to assemble and good and heavy. Not cheap. Very sturdy wood and love that it came with extra pieces of weed to add stabilizers to the floor so that the slats are steady. Nice fit.
Bed slats are to thin, replace or use re/enforcements.
Showed up just days after ordering. Super easy to assemble only took 1/2 hr. the two side boards are super flimsy and fit in place losley, kind of a waste of Matireal. We ordered the full size, its not super sturdy but wont be used on a daily basis. We made more legs to attach to the slats as they only make 4 per bed, the full size needs 8/10 of them because of how big the bed is and how flimsy slats are. Over all its a nice bed for the price. I will say the lack of sturdiness is do to the thin beds slats. Company use solid pine slats with a single long wood rail with 6 support posts on it to attach under slats in middle of bed that runs head to foot, this will make bed sturdy and hold extra150lbs in weight when/ if needed. Its not as sturdy as I would have like.
Seller was very helpful and responsive!
We had a few problems, but the seller was very helpful and responsive. All in all a very nice bed! Get it!!
Good kids bed
Good bed, easy to put together Very sturdy.
Sturdy Bed!
I actually bought 2 of these for my children and they love them! I would advise hammering the wooden slots down with nails otherwise theyll shift around but its a sturdy beautiful frame! Cool!!
Not easy to assemble
Daybed is attractive but very difficult to assemble. After several frustrating hours I emailed the customer service department asking about a particular diagram. The only thing they provide are some very confusing drawings with letters, numbers. Some are clearly wrong. The answer I received was we dont have an assembly department The bed is still not finished! Sturdy for light items.
Add a review