Love the bed and it’s relatively easy to assemble except they should have planned the steps out better.
Pro-tip: after assembling the rectangular frame that holds the mattress, wait to attach it to the drawers until you have assembled and attached the support legs.
Unless you are a contortionist. Then have at it.
We have only had this frame for 3 months and within two months, it’s already breaking. All the seller wants to do is send me more screws. Not worth $1000 at all. So upset about this purchase. This pictures attached are only two of the problem areas. More screws have popped out since. This thing is supposed to hold almost 900lbs and we aren’t even close to that. Poor quality for sure.
Love this bed frame. Came in 4 boxes and the boxes were numbered so you started with 1 and went on using the instructions. It comes with an Allen wrench but I would highly suggest power tools there is A LOT of screws. A LOT. My husband and I got it done in 6 hours together. You definitely need 2 people. He is a construction worker so we put it together very quickly (with power tools) I would say for people not as skilled in assembling it would take 10-12 hours.
It’s real wood it’s solid it’s well designed and fits a king mattress perfectly.
I really do like the simplicity of this design. Plenty of storage with room for me to modify it later. There did seem to be missing hardware. I was shorted like... 4 or 6 E screws (I think they were E). But I was able to make it work.
Rather easy to assemble, just takes a while to do so. Loving it so far though.
We ran into two issues that forced us to have to stop at the end of the night without finishing. One of the boards for the frame is bowed making it difficult to get the frame aligned. One of the screw holes is slightly too large and the screw is not catching. We will have to go and get wood glue to fill the hole and hope once it dries we can attach the frame in that spot. My husband is ticked that we have these issues for such an expensive bed and our son will be sleeping with his mattress on the floor in another room until we solve the issues.
This bed once complete is very study and is beautiful. As a 65yo woman I have put together many pieces of funiture.
Cons: The number of the boxes are hard to read, as it is on the top of the box in green print, Box one had a label on the side that said 1. There are No written directions but the pictures are very good if you take the time to really study them as I did step by step. Do not assume or jump ahead without following the pictorial directions.
Pros: This was sent three weeks earlier then stated which was great for me. Unfortunately the shipping company delayed shipping one box for a couple of days. I dont know if it was missrouted or what but I had to wait until it came to begin putting this together.
I was a little upset that while assembling the first of four boxes I was short two critical specialty screws to complete assembling the bottom unit. When I opened the second box I found that I had enough of the needed screws to continue. When box 1 the bottom section was assembled I was worried that it was not a full size because it looked short but when we measured it it was indeed a full size base. I assembled the second and third box and found that I had plenty of hardware for the pieces. The fourth box containes the framework for the holding the mattress and the slats to go underneath. Pay close attention to the orintation of the boards and pieces as you go along and you will be fine. I used a small ratchet and battery powered screw driver to assemble this, as at 65 years of age my wrists are not what they used to be. If you take your time I believe that you will be very pleased with the outcome as I was. Overall this is a very nice piece of furniture that should last for many years.
My husband put the bed together quickly. All the pieces were here and fit. There are a few very minor imperfections in the finish that are only noticeable on close examination. I gave it less than 5 stars because of the 250-pound weight limitation, definitely unreasonable for a queen size bed. Im using a 10-inch memory foam mattress that fits perfectly.
So far, only a single person has slept in the bed. It has been stable. Were expecting 2 guests this summer. Well reinforce the supports and frame ourselves. Still a great buy.
This is a good bed frame, but the assembly was insane. Not difficult, but I strongly advise setting aside a day to assemble, or paying for professional assembly.
Reviews
Engineering 101
Love the bed and it’s relatively easy to assemble except they should have planned the steps out better. Pro-tip: after assembling the rectangular frame that holds the mattress, wait to attach it to the drawers until you have assembled and attached the support legs. Unless you are a contortionist. Then have at it.
Doesn’t hold up
We have only had this frame for 3 months and within two months, it’s already breaking. All the seller wants to do is send me more screws. Not worth $1000 at all. So upset about this purchase. This pictures attached are only two of the problem areas. More screws have popped out since. This thing is supposed to hold almost 900lbs and we aren’t even close to that. Poor quality for sure.
Love it
Love this bed frame. Came in 4 boxes and the boxes were numbered so you started with 1 and went on using the instructions. It comes with an Allen wrench but I would highly suggest power tools there is A LOT of screws. A LOT. My husband and I got it done in 6 hours together. You definitely need 2 people. He is a construction worker so we put it together very quickly (with power tools) I would say for people not as skilled in assembling it would take 10-12 hours. It’s real wood it’s solid it’s well designed and fits a king mattress perfectly.
I love them
I’m glad I went ahead and purchased them for my boys (12/8/6) they are bigger than expected but definitely worth the money spent.
Loving it so far
I really do like the simplicity of this design. Plenty of storage with room for me to modify it later. There did seem to be missing hardware. I was shorted like... 4 or 6 E screws (I think they were E). But I was able to make it work. Rather easy to assemble, just takes a while to do so. Loving it so far though.
My husband and I built together
We ran into two issues that forced us to have to stop at the end of the night without finishing. One of the boards for the frame is bowed making it difficult to get the frame aligned. One of the screw holes is slightly too large and the screw is not catching. We will have to go and get wood glue to fill the hole and hope once it dries we can attach the frame in that spot. My husband is ticked that we have these issues for such an expensive bed and our son will be sleeping with his mattress on the floor in another room until we solve the issues.
Very Nice Bed
This bed once complete is very study and is beautiful. As a 65yo woman I have put together many pieces of funiture. Cons: The number of the boxes are hard to read, as it is on the top of the box in green print, Box one had a label on the side that said 1. There are No written directions but the pictures are very good if you take the time to really study them as I did step by step. Do not assume or jump ahead without following the pictorial directions. Pros: This was sent three weeks earlier then stated which was great for me. Unfortunately the shipping company delayed shipping one box for a couple of days. I dont know if it was missrouted or what but I had to wait until it came to begin putting this together. I was a little upset that while assembling the first of four boxes I was short two critical specialty screws to complete assembling the bottom unit. When I opened the second box I found that I had enough of the needed screws to continue. When box 1 the bottom section was assembled I was worried that it was not a full size because it looked short but when we measured it it was indeed a full size base. I assembled the second and third box and found that I had plenty of hardware for the pieces. The fourth box containes the framework for the holding the mattress and the slats to go underneath. Pay close attention to the orintation of the boards and pieces as you go along and you will be fine. I used a small ratchet and battery powered screw driver to assemble this, as at 65 years of age my wrists are not what they used to be. If you take your time I believe that you will be very pleased with the outcome as I was. Overall this is a very nice piece of furniture that should last for many years.
Great guest bed
My husband put the bed together quickly. All the pieces were here and fit. There are a few very minor imperfections in the finish that are only noticeable on close examination. I gave it less than 5 stars because of the 250-pound weight limitation, definitely unreasonable for a queen size bed. Im using a 10-inch memory foam mattress that fits perfectly. So far, only a single person has slept in the bed. It has been stable. Were expecting 2 guests this summer. Well reinforce the supports and frame ourselves. Still a great buy.
Good bed, assembly challenge.
This is a good bed frame, but the assembly was insane. Not difficult, but I strongly advise setting aside a day to assemble, or paying for professional assembly.
Over 1000 parts
Takes forever to put together!
Add a review