Though there were a LOT of parts, no extra pieces (faulty screw meant I had to go to a hardware store to get a replacement), and it took a LOT of time the end result is solid and beautiful! Absolutely no regrets! Definitely worth it.
Not worth how much we paired for it the draw bars were slightly bent when we got it and after about 2 weeks my husband had to screw 3 of the board in place because they kept falling out. Now after having it and sleeping on it for almost a year is starting fall apart even more. Super small!
Very cute and not difficult to assemble. The only downfall, in my opinion, is that the main support boards in the middle of the bed, which bear weight and support the drawers, are made of particle board. Good one.
The quality of materials is a lot better than a 14year old frame I had beforehand, but there are a couple issues:
I absolutely hate the planks of under. They move out of place, and they are all just short enough that they barely fit into the guides and will pop out, if I can get a single piece of wood instead of individual planks I would be able to sleep better. Now this could also just happen to be a manufacturing error, Id rather it be too long by a little bit, Im sure we got some peeps willing to do some wood cutting.
The second sort of has to do with the first note, the end of my bed bows out a little bit, causing the planks not to fit properly, and with that extra play I believe caused screws to strip the wood so now the frame isnt secured. Almost better to just put your mattress on the floor. Or make a bed frame out of the frame of a car The drawers are roomy and great use of space with the 6 of them. Looks great.
Check out the other drawer storage bed frame for good instructions on reinforcing it when you first assemble it. You will need additional L brackets, tape for the slats to get snug in their slots, a sander or lots of time with sandpaper, and some thin and tall wood screws to hold the slats down to the inner support pieces. When you reinforce it as instructed in the other review, you must remember to also sand the slats after you install them and put in the screws through the middle. Then you will have a splinter/free surface to lay your mattress. Also, put together your drawers early and make sure you have enough clearance to install them all on both sides, if you are putting together this bed near any walls or furniture that may hinder you. I learned that the hard way.
If any of you need the instructions for reinforcing and stabilizing the bed for longevity and quiet, request another review and I can give step by step instructions and possibly photos to assist your build. Great Value.
You get what you pay for. Its not the best bed frame in the world and was a little time consuming to put together (I put 90 of it together with a screwdriver, not recommend. I quit on the draws and waited to get a little power drill from my dad to finish it). It wasnt really hard to put together but like I said a little drill would have made it maybe an hour and a half or so to put together. But not wanting to spend 100s and 100s of dollars and wanting a bed with a little bit of storage it works. Overpriced.
Reviews
Five Stars
This bed has been perfect for my guest room! Love the extra storage it provides! Just fine.
Time consuming but WORTH IT!
Though there were a LOT of parts, no extra pieces (faulty screw meant I had to go to a hardware store to get a replacement), and it took a LOT of time the end result is solid and beautiful! Absolutely no regrets! Definitely worth it.
If youre looking for something that will last dont get this.
Not worth how much we paired for it the draw bars were slightly bent when we got it and after about 2 weeks my husband had to screw 3 of the board in place because they kept falling out. Now after having it and sleeping on it for almost a year is starting fall apart even more. Super small!
Very cute and not difficult to assemble. The only
Very cute and not difficult to assemble. The only downfall, in my opinion, is that the main support boards in the middle of the bed, which bear weight and support the drawers, are made of particle board. Good one.
We really need to get rid of wood planks
The quality of materials is a lot better than a 14year old frame I had beforehand, but there are a couple issues: I absolutely hate the planks of under. They move out of place, and they are all just short enough that they barely fit into the guides and will pop out, if I can get a single piece of wood instead of individual planks I would be able to sleep better. Now this could also just happen to be a manufacturing error, Id rather it be too long by a little bit, Im sure we got some peeps willing to do some wood cutting. The second sort of has to do with the first note, the end of my bed bows out a little bit, causing the planks not to fit properly, and with that extra play I believe caused screws to strip the wood so now the frame isnt secured. Almost better to just put your mattress on the floor. Or make a bed frame out of the frame of a car The drawers are roomy and great use of space with the 6 of them. Looks great.
Five Stars
The bed came in on time and went together fairly easy Nicely made.
Three Stars
the bed is great a little problem with one drawer , but my grandson love his bed. Not super sturdy.
Great design and storage space, just be sure to do some extra reinforcing for longevity and quiet
Check out the other drawer storage bed frame for good instructions on reinforcing it when you first assemble it. You will need additional L brackets, tape for the slats to get snug in their slots, a sander or lots of time with sandpaper, and some thin and tall wood screws to hold the slats down to the inner support pieces. When you reinforce it as instructed in the other review, you must remember to also sand the slats after you install them and put in the screws through the middle. Then you will have a splinter/free surface to lay your mattress. Also, put together your drawers early and make sure you have enough clearance to install them all on both sides, if you are putting together this bed near any walls or furniture that may hinder you. I learned that the hard way. If any of you need the instructions for reinforcing and stabilizing the bed for longevity and quiet, request another review and I can give step by step instructions and possibly photos to assist your build. Great Value.
Its a great, sturdy
This bed took a lot of effort and time to put together well, but it was worth it. Its a great, sturdy bed But it still works great.
Its not the best bed frame in the world and was a little
You get what you pay for. Its not the best bed frame in the world and was a little time consuming to put together (I put 90 of it together with a screwdriver, not recommend. I quit on the draws and waited to get a little power drill from my dad to finish it). It wasnt really hard to put together but like I said a little drill would have made it maybe an hour and a half or so to put together. But not wanting to spend 100s and 100s of dollars and wanting a bed with a little bit of storage it works. Overpriced.
Add a review