I rarely write reviews, I just dont have time. However beds are important. We spend between 1/4 and 1/3 of our life in one.
I purchase a king size lull mattress-for reference of fit. I wanted a wing back because my pillows always fall into my side table and knock my water off among other things. But I didnt want an overly dramatic one that felt like a couch. I also wanted a frame with a high weight capacity because my kids are JUMPERS, lots of slats (for the jumping reason) and fabric to protect my rambuctious childrens brains, bones, and eyes.
Im a single mother with two toddlers, Im 100lbs soaking wet. I read reviews across the internet and had high hopes I cod handle it.
The box arrived on my porch over a week early. Which made my day.
Box was dinged up but not pierced so I was little worried. The damn thing was heavy. I heaved it in the door. Opened it, and carried the parts up stair. It took 3 trips.
Read your directions carefully. There are 4 different sizes of screws. My eldest legitimately helped me put this bed together, he is FIVE years old. He was able to get all the screws in place for me with ease and I tightened them using the provided tool. Do not tighten the screws down until you have finished that set of directions, it makes it easier.
One of the bore holes was slightly off but it did not effect the bed, aestethic, function or stability. Fabric is not the best quality but its definitely not the worst. Stitching is fair at best, but its a 200 padded frame for Petes sake. And your easy getting a 600-800 value for it.
I was very concerned about It being durable and sturdy, because the aestetic fabric pieces (headboard, sides etc) are SO lightweight. But this thing is a BEAST.
Also a good tip. For the pieces that hook in. Set your screws in FIRST, and then lower hooks over it, then tighten. Makes it super easy.
Side notes of things Im super happy about.
-the mattress fits perfectly. There is a small space at the corner but If I tug the mattress down a hair its fine. I hate frames that come out from the bed, or the bed hangs over. This one is JUST right. Perfect fit. Sets on with about 1/4-1/2, which is exactly what your sheets and blankets use when you make your bed.
-support pegs are conveniently placed.
I had read reviews elsewhere where people complained about stubbing their toe on the center pegs on the exterior/sides. Thankfully I havent had an issue, and the corner supports are rounded which is really nice.
-no tacks or pointy screws. No pokey annoying pieces of any kind d
-stays in place, its extremely sturdy and stationary YET, can be moved intentionally without a fight.
-has No SMELL.
-is smooth woven cotton based.
-does not require a box spring
-is low enough you could use a box spring, yet is not so low that if you go mattress only, you feel like your sleeping on the ground.
-storage capable. Perfectly fits those flat sterilite containers, the 6 high under bed storage totes with ease.
-easy to assemble
-heavy duty velcro slats(means they stay in place) and minimal distance between slats meets more support and high weight capacity
-despite being a wing back, frame takes up very little space. It is not so obnoxious it eats the room.
-gorgeous color, not overwhelming and threads are multi tone giving it warmth
-perfect for standard window placement. If you go mattress only it tucks nicely under the window sill
-baseboard friendly, because of the support pegs placent, the baseboard will not cause a crazy gap between your mattress and wall if your a corner sleeper like me. The headboard is flush too without scraping the paint off.
I honestly cant think of anything negative about this bed frame. It is one of the best investments Ive made. I even spilled a little water on it and it did not instantly absorb, I had time to grab a towels and dab it off before it soaked in.
All in all if you have doubts, dont. Because this bed frame is amazeballs.
I purchased mine from Walmart for $165. Assembly was no problem - it definitely helps to have an electric drill/tool with a hex nut, but a Hex key wrench is included. The frame sits about 13.5 up and my mattress is 12. Sadly a bit high for my girls to jump up (and down) from the bed (2 small Shih Tzus). But otherwise very happy with the frame.
This bed is beautiful, sturdy,and easy to put together. The fabric is soft and such a beautiful pink color. I had a slight product error and the seller took care of it immediately. Highly recommend
I got this bed to downsize from my chunky wood frame that was too long for my adjustable bed. The pillows would fall behind when the head was raised. I found some reviews on different sites that showed this very same bed worked with adjustable- since I got mixed reviews from here that weren’t clear. It fit my split king with twin XL mattress perfectly! I didn’t install any of the inside frame supports or slats, I just assembled the bed in sections and built around the bed so I didn’t have to unplug anything. (Just raise the head and feet when assembling corners and wings) I did it in an hour by myself, while Netflixing. Anyway, sturdy enough for what I need seeing as I have my own base, but the slats seemed like they were okay quality. All in all, great bed. Easy to assemble and creates so much more space in my room!
I really like the design of my new bed. Although the color in the picture is slightly greenish, the real color is more grey as stated in the description. It takes a while to resemble the bed but the time spent on that worths.
Reviews
Thought it might be cheaply made-it wasn’t!
Well made. We got the burnt orange color. Love it! Easy to assemble. We’ve been looking for years and finally made the leap—it was worth it!
Insanely amazing and perfect for the price
I rarely write reviews, I just dont have time. However beds are important. We spend between 1/4 and 1/3 of our life in one. I purchase a king size lull mattress-for reference of fit. I wanted a wing back because my pillows always fall into my side table and knock my water off among other things. But I didnt want an overly dramatic one that felt like a couch. I also wanted a frame with a high weight capacity because my kids are JUMPERS, lots of slats (for the jumping reason) and fabric to protect my rambuctious childrens brains, bones, and eyes. Im a single mother with two toddlers, Im 100lbs soaking wet. I read reviews across the internet and had high hopes I cod handle it. The box arrived on my porch over a week early. Which made my day. Box was dinged up but not pierced so I was little worried. The damn thing was heavy. I heaved it in the door. Opened it, and carried the parts up stair. It took 3 trips. Read your directions carefully. There are 4 different sizes of screws. My eldest legitimately helped me put this bed together, he is FIVE years old. He was able to get all the screws in place for me with ease and I tightened them using the provided tool. Do not tighten the screws down until you have finished that set of directions, it makes it easier. One of the bore holes was slightly off but it did not effect the bed, aestethic, function or stability. Fabric is not the best quality but its definitely not the worst. Stitching is fair at best, but its a 200 padded frame for Petes sake. And your easy getting a 600-800 value for it. I was very concerned about It being durable and sturdy, because the aestetic fabric pieces (headboard, sides etc) are SO lightweight. But this thing is a BEAST. Also a good tip. For the pieces that hook in. Set your screws in FIRST, and then lower hooks over it, then tighten. Makes it super easy. Side notes of things Im super happy about. -the mattress fits perfectly. There is a small space at the corner but If I tug the mattress down a hair its fine. I hate frames that come out from the bed, or the bed hangs over. This one is JUST right. Perfect fit. Sets on with about 1/4-1/2, which is exactly what your sheets and blankets use when you make your bed. -support pegs are conveniently placed. I had read reviews elsewhere where people complained about stubbing their toe on the center pegs on the exterior/sides. Thankfully I havent had an issue, and the corner supports are rounded which is really nice. -no tacks or pointy screws. No pokey annoying pieces of any kind d -stays in place, its extremely sturdy and stationary YET, can be moved intentionally without a fight. -has No SMELL. -is smooth woven cotton based. -does not require a box spring -is low enough you could use a box spring, yet is not so low that if you go mattress only, you feel like your sleeping on the ground. -storage capable. Perfectly fits those flat sterilite containers, the 6 high under bed storage totes with ease. -easy to assemble -heavy duty velcro slats(means they stay in place) and minimal distance between slats meets more support and high weight capacity -despite being a wing back, frame takes up very little space. It is not so obnoxious it eats the room. -gorgeous color, not overwhelming and threads are multi tone giving it warmth -perfect for standard window placement. If you go mattress only it tucks nicely under the window sill -baseboard friendly, because of the support pegs placent, the baseboard will not cause a crazy gap between your mattress and wall if your a corner sleeper like me. The headboard is flush too without scraping the paint off. I honestly cant think of anything negative about this bed frame. It is one of the best investments Ive made. I even spilled a little water on it and it did not instantly absorb, I had time to grab a towels and dab it off before it soaked in. All in all if you have doubts, dont. Because this bed frame is amazeballs.
Very nice Bed and good quality of velvet used
Very nice Bed and good quality of velvet used
Nice sturdy frame, with a lot of storage space under
I purchased mine from Walmart for $165. Assembly was no problem - it definitely helps to have an electric drill/tool with a hex nut, but a Hex key wrench is included. The frame sits about 13.5 up and my mattress is 12. Sadly a bit high for my girls to jump up (and down) from the bed (2 small Shih Tzus). But otherwise very happy with the frame.
So pretty
This bed is beautiful, sturdy,and easy to put together. The fabric is soft and such a beautiful pink color. I had a slight product error and the seller took care of it immediately. Highly recommend
Lovely color
Great bed to add color to the bedroom. Overall very sturdy and quiet metal frame; we are very happy with this purchase!
Picture Perfect
Just as pictured. I love it.
Good Quality for the Money
This looks like the images provided. Havent had issues with squeaking and it seemed to get put together fairly easy. Makes our room look a lot nicer.
Great bed! Works with King Adjustable!!
I got this bed to downsize from my chunky wood frame that was too long for my adjustable bed. The pillows would fall behind when the head was raised. I found some reviews on different sites that showed this very same bed worked with adjustable- since I got mixed reviews from here that weren’t clear. It fit my split king with twin XL mattress perfectly! I didn’t install any of the inside frame supports or slats, I just assembled the bed in sections and built around the bed so I didn’t have to unplug anything. (Just raise the head and feet when assembling corners and wings) I did it in an hour by myself, while Netflixing. Anyway, sturdy enough for what I need seeing as I have my own base, but the slats seemed like they were okay quality. All in all, great bed. Easy to assemble and creates so much more space in my room!
Pretty
I really like the design of my new bed. Although the color in the picture is slightly greenish, the real color is more grey as stated in the description. It takes a while to resemble the bed but the time spent on that worths.
Add a review