Make sure its Square before nailing on the back TIP in comments.
This is actually the 3rd one I bought of this brand. My other 2 went together much easier but for some reason my couldnt get the doors to hang right on this one. I adjusted them for HOURS, removing them multiple times and reattaching. Finally I realized that the entire cabinet must not be fully square causing the uneven doors. I had to remove the nailed on back, make it square then re/nail in.
Tip for set up:
To prevent this on initial assembly only nail in about 1/3 of the nails (doing about every 3rd hole around it). Once you see how the doors hang/ you can: get them adjusted to close correctly, make sure theres no gap between the doors and are flush/square with the cabinet / THEN go back and add the rest of the nails to the back.
Make sure to add the bracket anchor to prevent the cabinet from tipping over once set up! Dont need little ones, pets or other loved ones getting crushed by it.
Make sure its Square before nailing on the back TIP in comments.
This is actually the 3rd one I bought of this brand. My other 2 went together much easier but for some reason my couldnt get the doors to hang right on this one. I adjusted them for HOURS, removing them multiple times and reattaching. Finally I realized that the entire cabinet must not be fully square causing the uneven doors. I had to remove the nailed on back, make it square then re/nail in. Tip for set up: To prevent this on initial assembly only nail in about 1/3 of the nails (doing about every 3rd hole around it). Once you see how the doors hang/ you can: get them adjusted to close correctly, make sure theres no gap between the doors and are flush/square with the cabinet / THEN go back and add the rest of the nails to the back. Make sure to add the bracket anchor to prevent the cabinet from tipping over once set up! Dont need little ones, pets or other loved ones getting crushed by it.