I purchased the full size bed from and I am happy with the purchase. The bed is solid and looks good. Their Customer Service is also a pleasure to work with. I am knocking one star off of this review for a couple of reasons. First, one of the bolts that I received for the bed was unusable. I had to call Customer Service to get a replacement. Second, there is a slight design flaw with securing the foot board to the bed. More on that below.
There are 2 screws (1 on each side of the bed) that secure the side rails to the foot board. These screws are nearly impossible to reach using a screwdriver because the screws line up exactly level with part of the side rails. Heres my tip for getting around this. Follow the instructions and assemble the rails to the foot board. They will attach without the screws (via metal hooks). The screws are used to secure the foot board in place. Mark where the screws will go using either the screws or a pencil. Now detach the foot board from the rails. Screw the screws all the way into the foot board without the rails in place. This will create the guide holes for the screws. Remove the 2 screws. Attach the rails to the foot board again. With the guide holes already in place, screw the screws back in to secure the foot board. You will still not be able to comfortably position your screwdriver, but you should be able to position it at an angle, and with the guide holes in place, the screws should go in at the correct angle.
Solid, good looking and sturdy bed
I purchased the full size bed from and I am happy with the purchase. The bed is solid and looks good. Their Customer Service is also a pleasure to work with. I am knocking one star off of this review for a couple of reasons. First, one of the bolts that I received for the bed was unusable. I had to call Customer Service to get a replacement. Second, there is a slight design flaw with securing the foot board to the bed. More on that below. There are 2 screws (1 on each side of the bed) that secure the side rails to the foot board. These screws are nearly impossible to reach using a screwdriver because the screws line up exactly level with part of the side rails. Heres my tip for getting around this. Follow the instructions and assemble the rails to the foot board. They will attach without the screws (via metal hooks). The screws are used to secure the foot board in place. Mark where the screws will go using either the screws or a pencil. Now detach the foot board from the rails. Screw the screws all the way into the foot board without the rails in place. This will create the guide holes for the screws. Remove the 2 screws. Attach the rails to the foot board again. With the guide holes already in place, screw the screws back in to secure the foot board. You will still not be able to comfortably position your screwdriver, but you should be able to position it at an angle, and with the guide holes in place, the screws should go in at the correct angle.