There wasnt much of anything about the quality and sturdiness of the bed at all. The instructions on the other hand are sort of weak. You need a magnifying glass to see the drawn details better. I wasnt mad about plastic dowels either and I had to go buy a few right kind of screws because I was shorted. The drawer handle assembling aspect could have been better, The handles are thin and the screws will strip if you accidentally slightly over tighten them. I dont recommend downloading their instructions on their posting because they use numbers to designate the parts whereas the actual parts have letters as well as the instructions included when the package arrives. Because I used to work with cabinetry and am familiar with construction, when the plastic dowels snapped off I had to screw the parts of the bed the dowels were supposed to keep the joining parts held exposing the heads to the screws which the joint is not to be visible as to how it is to be joined. I would contact the seller with these issues of shortages with screws especially the large thick screws used in the bed frame and backboard, (M10x 44MM). I had to buy some and theyre not cheap as compared to others. Other than all of that, after all of what I said, the bed is fine. Its sturdy you just have to be careful because the bed isnt made out of solid wood and will chip apart if joining pieces are man handled when assembling the bed, its manufactured wood (particle board). Also, be careful to not break off any plastic dowels either by avoiding bending the joints where different joining pieces are held in place. Use kid gloves when assembling the bed. The great part about the bed however is the under mattress wood pieces Theyre not thin slats spaced apart but instead wide thick plywood cut to fit right against each other tightly, no gaps, and when theyre screwed in place the bed is solidly joined together without any worry about the frame separating apart. The bed is not that expensive but there are just some points you have to remember when assembling it. Overall, you just have to be patient. Decent for the price
Not a bad bed at all just needs tweeking.
There wasnt much of anything about the quality and sturdiness of the bed at all. The instructions on the other hand are sort of weak. You need a magnifying glass to see the drawn details better. I wasnt mad about plastic dowels either and I had to go buy a few right kind of screws because I was shorted. The drawer handle assembling aspect could have been better, The handles are thin and the screws will strip if you accidentally slightly over tighten them. I dont recommend downloading their instructions on their posting because they use numbers to designate the parts whereas the actual parts have letters as well as the instructions included when the package arrives. Because I used to work with cabinetry and am familiar with construction, when the plastic dowels snapped off I had to screw the parts of the bed the dowels were supposed to keep the joining parts held exposing the heads to the screws which the joint is not to be visible as to how it is to be joined. I would contact the seller with these issues of shortages with screws especially the large thick screws used in the bed frame and backboard, (M10x 44MM). I had to buy some and theyre not cheap as compared to others. Other than all of that, after all of what I said, the bed is fine. Its sturdy you just have to be careful because the bed isnt made out of solid wood and will chip apart if joining pieces are man handled when assembling the bed, its manufactured wood (particle board). Also, be careful to not break off any plastic dowels either by avoiding bending the joints where different joining pieces are held in place. Use kid gloves when assembling the bed. The great part about the bed however is the under mattress wood pieces Theyre not thin slats spaced apart but instead wide thick plywood cut to fit right against each other tightly, no gaps, and when theyre screwed in place the bed is solidly joined together without any worry about the frame separating apart. The bed is not that expensive but there are just some points you have to remember when assembling it. Overall, you just have to be patient. Decent for the price