I used this table to make a fly rod tube holder. Ideal size and good value. I made twelve 3 holes in both the top and bottom shelf and the table remained very solid. Used a pre/stain wood conditioner before staining and it turned out much better than expected considering the top and shelf are made from several pieces of parawood glued and joined together. Finished with coats of polyurethane. Easy to assemble. If you put in a little time and elbow grease, this table is a good value no matter how you might use it
Solid piece of furniture with an alternate use
I used this table to make a fly rod tube holder. Ideal size and good value. I made twelve 3 holes in both the top and bottom shelf and the table remained very solid. Used a pre/stain wood conditioner before staining and it turned out much better than expected considering the top and shelf are made from several pieces of parawood glued and joined together. Finished with coats of polyurethane. Easy to assemble. If you put in a little time and elbow grease, this table is a good value no matter how you might use it