When installing the legs, there are two screws needed for each leg. One of the screw holes on the legs did not line up with the pre drilled holes on the bottom of the seat. I tried unsuccessfully for about 15 minutes to get that screw installed with no luck. Each leg has a sticker indicating proper placement (ie LF, LR, RF, RR). All legs were verified to be in the proper spot. In order to remedy the problem, I ended up driving a 2/in screw through the side of a support frame under the bench to ensure the leg was secured. Something is trivial as this should not happen! Two stars deducted on what would otherwise be a nice little bench.
Looks nice, but.
When installing the legs, there are two screws needed for each leg. One of the screw holes on the legs did not line up with the pre drilled holes on the bottom of the seat. I tried unsuccessfully for about 15 minutes to get that screw installed with no luck. Each leg has a sticker indicating proper placement (ie LF, LR, RF, RR). All legs were verified to be in the proper spot. In order to remedy the problem, I ended up driving a 2/in screw through the side of a support frame under the bench to ensure the leg was secured. Something is trivial as this should not happen! Two stars deducted on what would otherwise be a nice little bench.