Kind of like the style of these chairs as Modern of the fifties and sixties era.
Caution on assembly. Assembling the arms hand tighten barrel screws(see photo) and then when inserting the arm/back assembly into the seat, use some kind of thin shaft into the hole to properly seat and center the barrel screws to ease assembly. When inserting the bolt screw with washer be very careful to make sure those fit perfectly into the barrel screw; that screws in easily otherwise you might cross thread the screw. Be careful to make the proper fit BEFORE trying to tighten as there seems to be an interference fit as the screw goes deeper into the barrel to the point that you can never back out anymore as the barrel and screw becomes stuck together.
Please be sure everything is fitting properly.
OBTW a T40 screwdriver or Allen wrench will fit the hex hole of the barrel screw. Well made, easy to assemble and useful.
Assembly of the arm/back assembly to the seat
Kind of like the style of these chairs as Modern of the fifties and sixties era. Caution on assembly. Assembling the arms hand tighten barrel screws(see photo) and then when inserting the arm/back assembly into the seat, use some kind of thin shaft into the hole to properly seat and center the barrel screws to ease assembly. When inserting the bolt screw with washer be very careful to make sure those fit perfectly into the barrel screw; that screws in easily otherwise you might cross thread the screw. Be careful to make the proper fit BEFORE trying to tighten as there seems to be an interference fit as the screw goes deeper into the barrel to the point that you can never back out anymore as the barrel and screw becomes stuck together. Please be sure everything is fitting properly. OBTW a T40 screwdriver or Allen wrench will fit the hex hole of the barrel screw. Well made, easy to assemble and useful.