Sadly I didnt think to take pictures but Ill describe as best I can what condition the safe was in after I opened the box up. There were no dings or dents of any kind even though the box looked like it had been through the ringer. The box had tears in it and yet the packaging protected the safe well. Sadly, the safes internals couldnt hold up to the wear/and/tear of shipping. When I finally got the door open I noticed that I couldnt lock it back up. It took me a good ten minutes to realize that the bottom locking bar on the side of the door was jamming everytime it went in. I fixed the problem by unscrewing the interior panel and loosening the two bolts that hold the rail with the locking bars and then plumbing said rail so the bottom doesnt move in more than the top. I hope you all can follow that! The main part of the problem came when I put the interior door panel back on. I found that one of the many screws holding the door panel on actually hit that bottom side locking bar. So, after plumbing the rail and leaving that screw out everyithing works like a charm now. It just sucks that I had to go through all that for something that costs over 300. The fingerprint reader and touchscreen work really well. Well see how everything holds up over time. Yes, Its great. loves it.
Good safe but needed some work
Sadly I didnt think to take pictures but Ill describe as best I can what condition the safe was in after I opened the box up. There were no dings or dents of any kind even though the box looked like it had been through the ringer. The box had tears in it and yet the packaging protected the safe well. Sadly, the safes internals couldnt hold up to the wear/and/tear of shipping. When I finally got the door open I noticed that I couldnt lock it back up. It took me a good ten minutes to realize that the bottom locking bar on the side of the door was jamming everytime it went in. I fixed the problem by unscrewing the interior panel and loosening the two bolts that hold the rail with the locking bars and then plumbing said rail so the bottom doesnt move in more than the top. I hope you all can follow that! The main part of the problem came when I put the interior door panel back on. I found that one of the many screws holding the door panel on actually hit that bottom side locking bar. So, after plumbing the rail and leaving that screw out everyithing works like a charm now. It just sucks that I had to go through all that for something that costs over 300. The fingerprint reader and touchscreen work really well. Well see how everything holds up over time. Yes, Its great. loves it.